Review of mechanical vibration tests conducted on control moment gyros and life test fixtures

Experimental vibration studies performed on a number of flight control moment gyros and bearing life test fixtures are summarized. Tests were performed at MSFC, at Wyle Laboratories, Huntsville, Alabama, and at the Bendix Corporation facilities in Teterboro, New Jersey. A description of test and analysis equipment is included as well as test procedures and overall performance rankings. Advanced ultrasonic rolling element bearing fault detection techniques were applied for bearing analysis along with conventional vibration and sound analysis procedures

New detection method for rolling element and bearing defects

Instrument for detecting defects in rolling elements of bearings is described. Detection depends on rate at which rolling elements impact defect and establishes envelope amplitude of ball resonant frequency. Block diagram of instrument is provided and results obtained in conducting tests are reported

Underground coal mine instrumentation and test

The need to evaluate mechanical performance of mine tools and to obtain test performance data from candidate systems dictate that an engineering data recording system be built. Because of the wide range of test parameters which would be evaluated, a general purpose data gathering system was designed and assembled to permit maximum versatility. A primary objective of this program was to provide a specific operating evaluation of a longwall mining machine vibration response under normal operating conditions. A number of mines were visited and a candidate for test evaluation was selected, based upon management cooperation, machine suitability, and mine conditions. Actual mine testing took place in a West Virginia mine

Development of sensitized pick coal interface detector system

One approach for detection of the coal interface is measurement of the pick cutting hoads and shock through the use of pick strain gage load cells and accelerometers. The cutting drum of a long wall mining machine contains a number of cutting picks. In order to measure pick loads and shocks, one pick was instrumented and telementry used to transmit the signals from the drum to an instrument-type tape recorder. A data system using FM telemetry was designed to transfer cutting bit load and shock information from the drum of a longwall shearer coal mining machine to a chassis mounted data recorder

A system for early warning of bearing failure

System for detecting incipient failure in ball bearings is described. Ultrasonic equipment detects bearing system resonance and provides warning signal through electronic circuitry. Detector can be used to evaluate performance of newly installed bearings. Schematic diagram is provided to show components

Development of sensitized pick coal interface detector system

One approach for detection of the coal interface is measurement of pick cutting loads and shock through the use of pick strain gage load cells and accelerometers. The cutting drum of a long wall mining machine contains a number of cutting picks. In order to measure pick loads and shocks, one pick was instrumented and telemetry used to transmit the signals from the drum to an instrument-type tape recorder. A data system using FM telemetry was designed to transfer cutting bit load and shock information from the drum of a longwall shearer coal mining machine to a chassis mounted data recorder. The design of components in the test data system were finalized, the required instruments were assembled, the instrument system was evaluated in an above-ground simulation test, and an underground test series to obtain tape recorded sensor data was conducted

Design and test of a pump failure anticipator

Tests were conducted on two different types of pumps in order to refine the concept and to finalize design details of a positive displacement internal gear pump and a shroudless centrifugal pump. A concept and a system that could be used with pumps to allow a rapid judgement to be made of the suitability of the pump for futher service is developed. Test results and detailed data analysis are included

Design and fabrication of prototype system for early warning of impending bearing failure

Ball bearing performance tests run on several identical ball bearings under a variety of load, speed, temperature, and lubrication conditions are reported. Bearing temperature, torque, vibration, noise, strain, cage speed, etc., were monitored to establish those measurements most suitable as indicators of ball bearing health. Tape records were made under steady-state conditions of a variety of speeds and loads. Sample sections were selected for narrowband spectral analysis with a real time analyzer. An artificial flow was created across the inner race surface of one bearing using an acid etch technique to produce the scratch. Tape records obtained before and after established a characteristic frequency response that identifies the presence of the flow. The signals found most useful as indicators of performance degradation were ultrasonic outputs

Globalisation, neo-liberalism and vocational learning: the case of English further education colleges

Further education (FE) has traditionally been a rather unspectacular activity. Lacking the visibility of schools or the prestige of universities, for the vast majority of its existence FE has had a relatively low profile on the margins of English education. Over recent years this situation has altered significantly and further education has undergone profound change. This paper argues that a combination of related factors – neo-liberalism, globalisation, and dominant discourses of the knowledge economy – has acted in synergy to transform FE into a highly performative and marketised sector. Against this backdrop, further education has been assigned a particular role based upon certain narrow and instrumental understandings of skill, employment and economic competitiveness. The paper argues that, although it has always been predominantly working class in nature, FE is now, more than ever, positioned firmly at the lower end of the institutional hierarchy in the highly class-stratified terrain of English education

On the shopfloor: exploring the impact of teacher trade unions on school-based industrial relations

Teachers are highly unionised workers and their trade unions exert an important influence on the shaping and implementation of educational policy. Despite this importance there is relatively little analysis of the impact of teacher trade unions in educational management literature. Very little empirical research has sought to establish the impact of teacher unions at school level. In an era of devolved management and quasi-markets this omission is significant. New personnel issues continue to emerge at school level and this may well generate increased trade union activity at the workplace. This article explores the extent to which devolved management is drawing school-based union representation into a more prominent role. It argues that whilst there can be significant differences between individual schools, increased school autonomy is raising the profile of trade union activity in the workplace, and this needs to be better reflected in educational management research